Lifter: Tool for lifting and installing shower trays
Lifter: Tool for lifting and installing shower trays
Ergonomic lifting for professional installers. Facilitates the installation of any shower tray, providing greater safety and precision for the installer. This single-use tool supports up to 40 kg, facilitating drain adjustment and placement without risk of injury or damage to the product.
Technical solution for handling and positioning heavy shower trays.
Lifter is a sturdy tool designed to facilitate the work of installers and renovators. It allows the shower tray to be tilted and handled safely, making it ideal for positioning the piece or repositioning the drain in a controlled manner.
Features
40 Kg Load
Hard to break
EU Standard
Single use
Adhesive 3M
Description
Benefits of the Lifter
Certified ergonomics: Designed in accordance with the parameters of European Directive 90/269/EEC for the manual handling of loads below the waist, protecting the lumbar health of the professional.
Robust load capacity: Each unit safely supports up to 40 kg in weight. For heavier trays, two units and the assistance of a second operator are required.
High-performance adhesion: Equipped with high-performance 3M LSE-110WF adhesive to ensure total fixation on resin and mineral-filled surfaces.
Damage-free installation: Allows the plate to be moved without the need for metal tools or expensive suction cups that can mark the surface.
Professional and intelligent use: It is a single-use product that ensures maximum adhesive effectiveness in each application.
Technical specifications
Material: High-strength white PES-PVC canvas, 580 g/m².
Technology: 3M™ high-adhesion approved adhesive.
Package contents: Includes 2 Lifter units and 2 cleaning wipes impregnated with 70% isopropyl alcohol.
The ideal solution for professional bathroom renovations
Lifter is the new essential tool for any bathroom renovation project. Specially designed to facilitate the task of replacing a bathtub with a shower tray, it allows you to install large-format shower trays with millimetre precision. It is the ideal tool for handling our Acrystone® non-slip shower trays, ensuring perfect placement even in the tightest spaces.
Instructions for use
To use the Lifter tool to handle shower trays, you will need a rigid tube (PVC or similar) longer than 30 cm, a cutter and conventional adhesive tape.
Positioning: Place the tray vertically on its long edge, which will act as a hinge.
Location: Place the Lifter in the centre of the long side. If the tray weighs more than 40 kg, use two on both long ends with the help of two people.
Cleaning: Carefully clean the application area with the included wipe or 96º alcohol in a single direction. Ensure that all dust is removed to guarantee adhesion.
Activating the Adhesive: Remove the protective paper from the adhesive tape.
Fixing: Stick the Lifter in place, aligning its adhesive edge with that of the tray, and press firmly with linear strokes.
Creating the Handle: Place a piece of PVC or slat as a handle and roll it downwards.
Securing: Secure the handle with two strips of adhesive tape on each side of the opening.
Finishing: After installing the tray, cut the Lifter flush with the edge. The adhesive base will remain under the tray without affecting the levelling and the rest can be discarded.
Frequently asked questions about Lifter
Can it be reused?
No, it is a non-reusable product. This tool is designed to install shower trays and then be recycled, to ensure safety in a single installation.
Why is it single-use?
The Lifter tool for facilitating the installation of shower trays is single-use to ensure that the 3M™ adhesive maintains its maximum mechanical strength and safety in every professional installation.
How many do I need for a large plate?
For trays weighing more than 40 kg, we recommend using two units and the help of a second operator.
Can it be used on any material?
Yes, it has been tested and approved for installing any shower tray, whether mineral-based or resin-based.
Does it leave visible residue?
No. When cut flush, the adhesive base is hidden under the tray without interfering with the seal or aesthetics, as it is only 2 mm thick and does not affect the installation of the shower tray in any way.
