Made to made measure can be added on the sides of the shower tray and its function is to give you the peace of mind against possible overflows of water. Moreover, if the shower tray is made to special order and gets sloped, this frame adapts to the cutting and makes the surface straight to support a shower enclosure. The frame is 1 cm thick and 4.5 cm wide.
The frame can be added on all sides(1,2,3 or 4 sides), and it is available in 10 standard colours or you can choose from one of our RAL.
Step-by-step installation guide for shower tray frames
Installing shower tray frames is a simple process if you follow the correct steps. By installing these elements, you not only guarantee an aesthetic and functional finish, but you also provide greater peace of mind to the user against possible water overflow if their shower is vigorous.
Below, we present a step-by-step guide to help you achieve a perfect installation and professional results.
Tools and materials needed
To successfully install shower tray enclosures, make sure you have the following materials and tools to hand:
Special bathroom adhesive (waterproof): Choose a high-quality adhesive, specifically designed to resist moisture and guarantee a strong and long-lasting bond.
Measuring tape: Precision is key. Use a measuring tape to accurately measure the perimeter of the shower tray.
Gun for applying silicone or adhesive: Makes it easier to apply the adhesive or silicone, ensuring an even layer.
Spatula for smoothing and distributing the sealant: Use a spatula to smooth the sealant and ensure that the joints are perfectly sealed.
Level: Essential to make sure everything is aligned.
Cloths: Before starting, clean the surface of the shower tray thoroughly to ensure proper adhesion.
Preparing the work area
It is crucial to prepare the work area well to ensure that everything is done cleanly and efficiently:
1) Make sure the area around the shower tray is completely clean and dry. Remove any remaining dirt, dust or old silicone using a clean cloth.
2) Check that the shower tray is level. An uneven tray can make it difficult to install the edges or slats correctly. If necessary, adjust the level before starting.
3) Have all materials and tools organised and ready to use during installation.
Accurate measurement and cutting of borders or slats
Accurate measurement and cutting is essential for a perfect finish. Follow these steps to ensure that the borders or slats fit correctly.
Measuring the perimeter: Use the tape measure to measure the perimeter of the shower tray. Make sure you measure each side individually to get a perfect fit.
Marking for cutting: Clearly mark the measurements on the borders or slats using a pencil, to ensure that the cuts are precise.
Clean, precise cutting: Use a saw or suitable cutter to make straight, clean cuts. This will ensure that the borders or slats fit perfectly into the shower tray.
Applying the adhesive and fixing correctly
Applying the adhesive correctly is crucial to ensure that the borders or slats remain fixed and stable for a long time. Here is the process to follow:
Uniform application: Use a silicone or adhesive gun to apply an even layer to the back of the border or slat. Do not apply too much adhesive, just enough to cover the surface.
Precise placement: Place the border or moulding following the measurement marks, pressing firmly to ensure it adheres correctly. Use a spirit level to check that it is aligned and straight.
Checking the fixing: After placing the borders or mouldings, press lightly to make sure they are fixed properly.
Sealing joints to guarantee impermeability
Proper sealing of joints is essential to prevent water leaks. Follow these steps to ensure that the joints are perfectly sealed:
Application of silicone: Apply a layer of silicone to the joints between the edges and the shower tray. You can choose transparent silicone or silicone the same colour as the edges so that it blends in better with the design.
Even distribution: Use a spatula to smooth the sealant, ensuring even coverage with no visible build-up.
Drying: Allow the sealant to dry for the recommended time to ensure that it remains waterproof.
Tips for a professional finish
To achieve a truly professional finish, follow these additional tips:
Checking the joints: Before finishing, check all the joints and corners to make sure they are completely sealed and there are no leaks.
Removing excess adhesive or silicone: If excess adhesive or silicone has accumulated anywhere, remove it with a clean cloth before it dries.
Applying limescale protector: Consider applying a limescale protector to the surfaces of the edges and slats to protect them against water stains and wear and tear, prolonging their lifespan.
Check for imperfections: Use additional lighting to inspect for any imperfections that may have gone unnoticed. The extra light can help you identify areas that need more attention.
Frequently asked questions about shower tray edging and slats
Are the edging and slats compatible with all types of shower trays?
Yes, mcbath's edging and slats are designed to adapt to a wide variety of shower trays, including extra-flat models and those made with materials such as Acrystone® or Acrymold®. This guarantees that you can find a perfect solution, no matter what type of shower tray you have.
Which material is most recommended for edging and slats?
The choice of material depends on the needs of your project. The most recommended materials for edges and slats are PVC, aluminium and Acrystone®, as they offer great durability, moisture resistance and ease of cleaning. These materials are ideal for keeping your bathroom in perfect condition in the long term.
Is it necessary to hire a professional for installation?
It is not essential to hire a professional for the installation, but having an experienced installer can guarantee a perfect finish and complete waterproofing. If you have DIY experience and follow our step-by-step guide, you can do the installation yourself without any problems.
How do I properly maintain and clean the borders and slats?
To keep your borders and slats in good condition:
- Clean regularly with warm water and a mild detergent.
- Avoid using abrasive products that could damage the finish of the materials.
- Check the joints regularly and reseal if necessary to prevent water seepage.
